User Manual

BlueParrott S450-XT User Manual
PAGE 10
ADVANCED BLUETOOTH
®
FEATURES AND FUNCTIONS
Multiple Device Pairing and Multipoint Mode
The S450-XT has pairing memory for up to 8 devices. The headset can also use
Multipoint Mode, which means that it can be connected to two Bluetooth devices at
the same time.
Using the S450-XT in Multipoint Mode
1. To use the S450-XT in Multipoint Mode, first make sure the headset is paired with
both your devices.
2. With both devices in range and with their Bluetooth enabled, power on the S450-XT.
3. As each Bluetooth device connects to the S450-XT, you will hear the voice prompt,
“Your headset is connected.”
The S450-XT will monitor both phones and enable you to answer a call on either one
from the headset.
If you are on a call and the other device receives a call, you will hear a notification in
the headset.
Additional Features and Functions
Last Number Redial
To redial the last number that was dialed from the cell phone, press and hold the
Volume Down button for approximately 1 second. A beep will be heard and the phone
will redial the last number.
Call Waiting/Rejecting a Call
If you are on an active call and a second call comes in, you will hear a low tone
notification in the headset. If supported by your phone, you have the following
options:
• To accept the incoming call and end the active call, press the MFB once to end the
active call, and then once again to answer the incoming call.
• To accept the incoming call and place the active call on hold, quickly press the
MFB twice.
• To reject the incoming call, press and hold the MFB for 1-2 seconds.