User's Manual

How to Charge this Bluetooth Headset

The Bluetooth headset has Built-in rechargeable battery.

Before using for the first time, you have to fully charge the battery for 2-3 hours.

１

can provide about 5 hours of listening time and over 150 hours of standby time.

Charging Instruction

1) The RED LED will flash continuously when battery power is low.

2) Connect the power charging ports with a power source (USB charger or AC charger). When

charging, the RED LED will be on.

3) When the headset is fully charged, the BLUE LED indicator will be ON. Disconnect the charger

from the power source.

How to use Bluetooth Headset along with your mobile phone

Power on

When the headset is off, long press the MFB button until the blue LED flickers to turn it on.

Enter pairing mode

When the headset is off, long press the MFB button until the blue and red LED flicker alternatively. It

means the Bluetooth Headset is in Pairing Mode.

Pair with the Mobile Phone

Pairing is the process of linking the Bluetooth Headset with your Bluetooth device (for example, a

mobile phone). Before you use Bluetooth Headset with your Bluetooth mobile phone, you must pair the

mobile phone with your headset. After the first time they got paired, next time you just need to turn the

headset on and off when you need it. It will automatically reconnect when you turn the headset on

(make sure your mobile phone Bluetooth function is on).

If you wish to use the headset with another mobile phone, you must repeat the pairing process with the

new mobile phone, in this case, the Bluetooth Headset will no longer work with the former mobile

phone.

Please follow the below steps for pairing:

1) When the headset is off, press and hold the MFB button until the red and blue LED flash

alternatively. Make sure your Bluetooth mobile phone is on, and its Bluetooth function has been

activated.

BP-S210