BE5C Specifications Sheet
BE5C
PRODUCT SPECIFICATIONS
COMPACT AIR HANDLER
FORM NO. BCE5C-100 (08/2019)
APPLICATION
• 1 1/2 - 5 ton systems
• Sequenced for demand management
• External access to heater circuit breakers
INSTALLATION
• 1 piece design
• Smaller profile for tight application areas
• Multiposition - Factory ready for upflow, downflow, and horizontal
left/right applications
• Approved for installation in manufactured housing and mobile
homes
CABINET
• Foil faced insulation for enhanced indoor air quality
• Double hemmed technology for increased structural rigidity
• Improved gasketing on doors to prevent air leaks
• Filter rack with thumb screws for easy access and removal
• Polymer plugs on drain locations for easy installation
• Baked polyester paint finished over galvanized steel for maximum
durability
• High-strength, UV and heat resistant polymer drain pan designed for
corrosion resistance
• Antimicrobial polymer drain pan built to resist mold and mildew
growth
• 2% or less air leakage
COILS
• Total corrosion protection coil
• Enhanced tube-and-fin coil design
• Lanced fins for maximum heat transfer
• Factory leak tested and pre-charged with nitrogen holding
charge
COMPONENTS
• Efficient PSC blower motors (4 and 5 ton units utilize constant
torque motor)
• Standard transformer and blower relay
• Field installed 5 - 20kW electric heat kits with easy plug connections
• Blower time delay for increased efficiency
• Sleeves on distributor tubing to protect tubes
WARRANTY
• 10 year limited warranty on all parts, extended warranty available
NOTE:
For the latest AHRI system matches, please visit
www.alliedratings.com or www.AHRIdirectory.org
Page 1