BE5C Specifications Sheet

ManualsBrandsBlueridge Manualsair handlers electric furnaces4 Ton Standard Multi-Positional Air Handler

BE5C

PRODUCT SPECIFICATIONS

COMPACT AIR HANDLER

FORM NO. BCE5C-100 (08/2019)

APPLICATION

• 1 1/2 - 5 ton systems

• Sequenced for demand management

• External access to heater circuit breakers

INSTALLATION

• 1 piece design

• Smaller profile for tight application areas

• Multiposition - Factory ready for upflow, downflow, and horizontal

left/right applications

• Approved for installation in manufactured housing and mobile

homes

CABINET

• Foil faced insulation for enhanced indoor air quality

• Double hemmed technology for increased structural rigidity

• Improved gasketing on doors to prevent air leaks

• Filter rack with thumb screws for easy access and removal

• Polymer plugs on drain locations for easy installation

• Baked polyester paint finished over galvanized steel for maximum

durability

• High-strength, UV and heat resistant polymer drain pan designed for

corrosion resistance

• Antimicrobial polymer drain pan built to resist mold and mildew

growth

• 2% or less air leakage

COILS

• Total corrosion protection coil

• Enhanced tube-and-fin coil design

• Lanced fins for maximum heat transfer

• Factory leak tested and pre-charged with nitrogen holding

charge

COMPONENTS

• Efficient PSC blower motors (4 and 5 ton units utilize constant

torque motor)

• Standard transformer and blower relay

• Field installed 5 - 20kW electric heat kits with easy plug connections

• Blower time delay for increased efficiency

• Sleeves on distributor tubing to protect tubes

WARRANTY

• 10 year limited warranty on all parts, extended warranty available

NOTE:

For the latest AHRI system matches, please visit

www.alliedratings.com or www.AHRIdirectory.org

Page 1

Summary of content (7 pages)

PAGE 1
BE5C PRODUCT SPECIFICATIONS COMPACT AIR HANDLER FORM NO.
PAGE 2
ENHANCED AIR HANDLER BE5C MODEL NUMBER GUIDE BC E 5 C 18 M A 1P PRODUCT BC= BLOWER COIL FEATURE SET METERING DEVICE E = ENHANCED FEATURES 4X = R410A TXV 1P = PISTON SERIES 5 = 5 SERIES (1 PIECE PLATFORM, OMNIGUARDTM) VOLTAGE MOTOR & CONTROL POSITION A = 208/230V - 1 PHASE - 60HZ C = PSC E = CONSTANT TORQUE V = VARIABLE SPEED M = MULTI-POSITION TONNAGE 18, 24, 30, 36, 42, 48, 60 PHYSICAL Model Volts/Hz/Phase Max. Elec. Heat Available (kW) Transformer Size & Type Filter Size (in.
PAGE 3
ENHANCED AIR HANDLER BE5C ACCESSORIES DESCRIPTION WHERE USED 18, 24, 30 12J18 TXV Kit 36, 42, 48 12J19 60 12J20 Down-flow Kit KIT NUMBER 18, 24, 30 Y9658 36, 42, 48, 60 Y9659 Horizontal Support Frame kit All Models 56J18 Side Return Unit Stand (upflow only) All Models 45K32 Single Point Power Kit All Models 21H39 Wall Hanging Bracket Kit (upflow only) All Models 45K30 High Performance Economizer (Commercial Only) All Models 10U53 ELECTRIC HEAT Electric Heat Kits with Termin
PAGE 4
ENHANCED AIR HANDLER BE5C ELECTRICAL Heating Capacity (240V) Model BE5C18 BE5C24 BE5C30 BE5C36 BE5C42 BE5C48 BE5C60 Nominal Heater SizekW kW Btuh 0 0 0 5 4.8 16400 7.5 7.5 25600 10 9.6 32700 Min. Circuit Ampacity Blower Amps 208V 1 1.1 2 240V 1 2 Max. Circuit Breaker Size 208V 1 2 240V 1 5 5 15 15 23 26 25 30 35 40 35 40 45 51 45 60 0 0 0 5 5 15 15 5 4.8 16400 24 27 25 30 7.5 7.5 25600 36 41 40 45 10 9.
PAGE 5
ENHANCED AIR HANDLER BE5C BLOWER Model BE5C18 BE5C24 BE5C30 BE5C36 BE5C42 BE5C48 BE5C60 Motor Size (hp) 1/5 1/3 1/2 1/3 1/2 1 1 Blower Size (in.) 9X6 9X6 10X8 10X8 10X8 12X10 12X10 Speed Tap CFM @ ESP - in. W.C. 0.1 0.2 0.3 0.4 0.
PAGE 6
ENHANCED AIR HANDLER BE5C UNIT DIMENSIONS - IN.
PAGE 7
ENHANCED AIR HANDLER BE5C (800) 865-5931 All specifications and illustrations subject to change without notice and without incurring obligations. FORM NO. BCE5C-100 (08/2019) Printed in the U.S.A.