M Series Remote Control Manual

3
4
MODE
MODE
FAN
FAN
TEMP
TEMP
SLEEP
SLEEP
ON/OFF
ON/OFF
SILENCE
FP
SILENCE
FP
TIMER
ON
TIMER
ON
TIMER
OFF
TIMER
OFF
1
1
2
2
4
4
3
3
8
8
9
9
7
7
5
5
6
6
10
10
12
12
11
11
13
13
14
14
1
2
Press this button to modify the air conditioner
mode in a sequence of following:
3
MODE Button
4
5
ON/OFF Button
This button turns the air conditioner ON
and OFF.
AUTO COOL
DRY
HEAT
FAN
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
FAN Button
SLEEP Button
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
Active/Disable sleep function. It can
maintain the most comfortable temperature
and save energy. This function is available
on COOL, HEAT or AUTO mode only .
For the detail, see sleep operation in
USER S MANUAL.
,
,,
,,
,,
,,
NOTE：Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling only
appliance.
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
SELF CLEAN Button
Active/Disable Self Clean function.
Under SELF CLEAN mode, the air
conditioner will automatically clean and dry
the Evaporator and keep it as fresh for the
next operation.
Operation of buttons
TIMER ON Button
7
9
8
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the auto-
timed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
Operation of buttons
6
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temper-
ature at cooling or heating operation in the
shortest time(if the indoor unit does not
support this function, there is no
corresponding operation happened when
pressing this button.)
SWING DIRECT
SWING DIRECT
,
,
,
,
,
SILENCE/FP Button
Active/Disable SILENCE function. If pushing
more than 2 seconds, the FP function will
be activated, pushing more than 2 seconds
again to disable.
When the Silence function is activated, the
compressor will operate at low frequency
and the indoor unit will bring faint breeze,
which will reduce the noise to the lowest
level and create a quiet and comfortable room
for you. Due to low frequency operation of
compressor, it may result in insufficient
cooling and heating capacity.
The FP function can only be activated
during the heating operation(only when the
setting mode is HEAT). The unit will operate
O
at a setting temperature of 46 F
.The display
window of indoor unit will display FP .Press
the buttons of ON/OFF, SLEEP, FP, MODE,
FAN SPEED, UP or DOWN while operating
will cancel the FP function.
,
,
,
LED FOLLOW
ME
LED FOLLOW
ME
TURBO SELF
CLEAN
TURBO SELF
CLEAN
UP Button( )
Push this button to decrease the indoor
o o
temperature setting in 1 F increments to 62 F.
DOWN Button( )
Push this button to increase the indoor
o o
temperature setting in 1 F increments to 86 F.
NOTE：Temperature contol is not available
in Fan mode.
NOTE: Press and hold UP and DOWN buttons
together for 3 seconds will alternate the temper-
O O
ature display between the C & F scale.