Remote Control Manual The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. CR166-RG57A6EU1 16117000A03597 20170603 Thank you very much for purchasing our air conditioner. Please read this owner's manual carefully before using your air conditioner.
Remote Controller Specifications CONTENTS Model RG57A6/BGEFU1 Rated Voltage 3.0V(Dry batteries R03/LR03×2) Remote controller Specifications................................................... 2 Signal Receiving Range 8m Operation buttons .................. ......................................................... 3 Environment 23 OF~140 OF Indicators on LCD .......................................................................... 6 How to use the buttons .......................................
Operation of buttons 1 2 ON/OFF Button This button turns the air conditioner ON and OFF. Operation of buttons 7 UP Button( ) Push this button to increase the indoor temperature setting in 1oF increments to 86oF. DOWN Button( ) Push this button to decrease the indoor temperature setting in 1oF increments to 62oF. MODE Button Press this button to modify the air conditioner mode in a sequence of following: AUTO COOL DRY HEAT NOTE：Temperature contol is not available in Fan mode.
Operation of buttons Indicators on LCD 10 TIMER OFF Button Press this button to initiate the auto-off time sequence. Each press will increase the auto -timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the autotimed program, simply adjust the auto-off time to 0.0 Information are displayed when the remote controller is powered up.
How to use the buttons How to use the buttons Dehumidifying operation Auto operation 2 3 ON/OFF SILENCE FP 1 MODE TIMER ON NOTE 1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller. 2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled. 3.
Timer operation Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit. To set the Auto-on time. ON/OFF SILENCE FP MODE TIMER ON TEMP TIMER OFF FAN SLEEP TURBO SELF CLEAN SWING DIRECT LED FOLLOW ME 1 2 1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-on time to START the operation. 2.
TIMER ON → TIMER OFF (Off → Start → Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house. TIMER OFF (Auto-off Operation) The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. Stop On Set 10 hours later Example: To stop the air conditioner in 10 hours. 1.
Handling the remote controller Location of the remote controller. Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. 8m CAUTIONS MOD E SWI NG SHO RTC TEM DIR UT P ECT FAN SPE ED TIM ON ER SLE FRE EP SH TIM OFFER SEL TUR F CLE BO AN FOL LED LOW ME RES ET LOC K The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit.
