WIRED REMOTE CONTROLLER Owner’s Manual MODEL: KJR-12B/DP(T)-F(series) KJR-12B/DP(T)-E(series) RCW8(P/N:7ACEL1706) WP-KJR-12B/DP(T)-E-2-02 IMPORTANT NOTE: Read this manual carefully before installing or operating your wired remote controller. Make sure to save this manual for future reference.
All the pictures in this manual are for explanation purpose only. There may be slightly different from the wired remote controller you purchased (depend on model). The actual shape shall prevail.
Table of Contents 1. Remote Control Buttons ............................................... 01 2. LCD Screen ......................................................................... 04 3. Basic Functions ................................................................. 05 4. Troubleshoot your remote control .............................
Remote Control Buttons ON/OFF BUTTON MODE BUTTON • Used to start/stop the air conditioner. • Used to select the operating mode AUTO → COOL→ DRY→HEAT→ FAN ADJUST BUTTON TIMER ON BUTTON • The UP (▲) and DOWN (▼)buttons are used to adjust the temperature. • Press these two buttons at the same time to switch between Celsius and Fahrenheit (some models) TIMER OFF BUTTON SWING BUTTON • For cooling-only units, there is no HEAT function.
ON/OFF BUTTON MODE BUTTON • Used to start/stop the air conditioner. • Used to select the operating mode AUTO → COOL→ DRY→HEAT→FAN • For cooling-only units, there is no HEAT function. ADJUST BUTTON • The UP (▲) and DOWN (▼) buttons are used to adjust the temperature. TIMER ON BUTTON • Used to automatically turn on the air conditioner at a specif ied time. SWING BUTTON TIMER OFF BUTTON • The SWING button starts and stops the louver movement and sets the desired airflow direction.
WARNING • • 3 DO NOT remove the cover or touch the interior parts of the remote control. DO NOT use sharp or pointed objects to press the remote control buttons.
LCD Screen Operation mode Displays the selected operating mode Follow me Displayed when the FOLLOW ME feature is activated ON/OFF Displayed when the air conditioner is on 1 2 1 Timer The “ON” sign lights up when the TIMER ON function is activated The “OFF” sign lights up when the TIMER OFF function is activated 12 Fan speed Displays the selected fan speed Lock Displayed when the LOCK mode is on Temperature display Displays the current set temperature Fig.
Basic Functions The following are instructions for using your air conditioner’s basic functions. AUTO Function In AUTO mode, the unit will automatically select the COOL, HEAT, FAN or DRY function based on the set temperature. 1 Press the MODE button, select AUTO. 2 Set your desired temperature using the UP ( ) and DOWN ( ) buttons. 3 Press the ON/OFF button to start the unit. NOTE: In AUTO mode, the fan speed is automatically set on AUTO mode and cannot be changed. ECONOMY Mode can also be activated.
COOL/HEAT/FAN Function 1 Press the MODE button to select COOL, HEAT or FAN. 2 Set your desired temperature using the UP ( ) and DOWN ( ) buttons. 3 Press the FAN SPEED button to select the fan speed. 4 Press the ON/OFF button to start the unit. NOTE: In FAN mode, the temperature cannot be changed. 4 1 TIME ON FOLLOW ME TIME OFF AUXIL HEATER ECO FAN SPEED MODE RESE T SWING TEMP 2 LOCK 3 Fig.
DRY Function 1 Press the MODE button, select DRY. 2 Set your desired temperature using the UP ( ) and DOWN ( ) buttons. 3 Press the ON/OFF button to start the unit. NOTE: In DRY mode, the ECONOMY and FAN SPEED buttons cannot be used. 3 1 TIME ON FOLLOW ME TIME OFF AUXIL HEATER ECO FAN SPEED MODE RESE T LOCK Fig.
FOLLOW ME Function The FOLLOW ME function enables the remote control to measure the temperature at its current location. When using AUTO, COOL, or HEAT functions, measuring ambient temperature from the remote control (instead of from the indoor unit itself ) will enable the air conditioner to make sure that the temperature around you is optimized for your comfort. 1 Press FOLLOW ME button to activate function. The remote control will send temperature signal to the indoor unit every three minutes.
Setting Air Flow Direction 1 Press the SWING button to activate the swing function. Press this button again to set the louver in the position you want. 2 Press and hold the SWING button for three seconds to make the louver move continuously. NOTE: The swing function can only be used in SWING mode. The swing range of the louvers is 30°. TIME ON FOLLOW ME TIME OFF AUXIL HEATER ECO FAN SPEED MODE SWING TEMP Swing Button RESE T LOCK Fig.
TIMER Function Your air conditioning unit has two timer-related functions: • TIMER ON – sets the amount of time after which the unit will automatically turn on. (Delayed on) • TIMER OFF – sets the amount of time after which the unit will automatically turn on. (Delayed off ) 1. TIMER ON Function The TIMER ON function allows you to set a period of time after which the unit will automatically turn on, such as when you come home from work. a Press TIMER ON button.
Example: Setting unit to turn on after 2.5 hours. TIMER ON TIMER ON x5 3sec 1 2 Fig. 9 2. TIMER OFF Function The TIMER OFF function allows you to set a period of time after which the unit will automatically turn off, such as when you wake up. Example: Setting unit to turn on after 5 hours. TIMER OFF TIMER OFF x10 3sec 1 2 Fig. 10 NOTE: When setting the TIMER ON or TIMER OFF functions, up to 10 hours, the time will increase in 30 minute increments with each press.
Setting both TIMER ON and TIMER OFF at the same time (Combined Timer Function) Keep in mind that the time periods you set for both functions refer to hours after the current time. For example, say that the current time is 1:00 PM, and you want the unit to turn on automatically at 7:00 PM. You want it to operate for 2 hours, then automatically turn off at 9:00 PM. Do the following: 1. Press TIMER ON button. The last TIMER ON setting will appear. 2. Press TIMER ON button repeatedly until “6.
1 TIMER ON 2 TIMER ON x12 3 3sec 1 4 TIMER OFF 5 TIMER OFF x16 6 3sec 1 Fig.
The unit will now turn on after 6 hours (7:00 PM) and turn off again after 8 hours (9:00 PM). (See Fig. 11) Your remote display Timer is set to turn ON 6 hours from current time FF Timer is set to turn OFF 8 hours from current time Timer starts Current time 1PM 2PM 3PM 4PM 5PM 6PM Unit turns Unit turns ON OFF 7PM 8PM 9PM 6 hours later 8 hours later Fig.
Troubleshoot Your Remote Control Symptoms Possible Causes Solution Check whether AUTO mode is selected. In AUTO mode, the fan speed is set automatically and cannot be changed. Check whether DRY mode is selected. In DRY mode, the FAN SPEED button is ineffective. The fan speed can only be changed in COOL, FAN and HEAT mode. The temperature display is off Check whether FAN mode is selected. In FAN mode, the temperature cannot be adjusted.
The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details.
此面无需印刷 技术 要求： 1. 双胶纸(说明书)80g非E项目正度 2.尺寸：130*130mm 3.颜色：黑白 4.注意：排版时注意页码数字都是靠外面的，以便翻阅 5.
