WiFi Module for Wall Mount User Manual

Page 15 of 15
8. If you have trouble with setup
Once you have seen the success message, the system is set up. However, you may not see the
AC in the device list on the Nethome Plus home page. If this happens, try these steps in order.
• Swipe downwards on the Nethome Plus home page list, where it says “+ Add Device”.
You should see the software refreshing the page. Try this a few times, and if nothing
appears, wait 15- 30 minutes and try again.
• Power off the AC unit using the remote. Power the unit back up and wait 15- 30
minutes. The device should appear in the list. If not, try swiping down a few times.
• Power off the AC unit with the remote, then cut power to the AC at the breaker. Unplug
power from your WiFi router and restart your Android or iOS device. Power everything
back up and wait 15- 30 minutes. Try swiping down to refresh the list, and if no result
repeat the entire installation process.
Thank you for your purchase of a BLUERIDGE ductless mini-split system and WiFi app controller!
We hope this equipment and the app will provide you and yours with many years of comfortable
enjoyment of your space.
Kind Regards,
The BLUERIDGE Team