BMKH0938/O Owners Manual

Table Of Contents

Installation of outdoor unit

(select it according to the actual installation situation)

1. Select installation location according to the house structure.

2. Fix the support of outdoor unit on the selected location with expansion screws.

at least 3cm above the floor

Note:

installing the outdoor unit.

●

Make sure the support can withstand at least

four times of the unit weight.

● The outdoor unit should be installed at least

joint.

● For the unit with cooling capacity of 2300W

~5000W, 6 expansion screws are needed;

for the unit with cooling capacity of 6000W

~8000W, 8 expansion screws are needed;

for the unit with cooling capacity of 10000W

~16000W, 10 expansion screws are needed.

Step two: install drain joint

gnitaeh dna gnilooc rof ylnO(

unit)

1. Connect the outdoor drain joint into

the hole on the chassis, as shown in

the picture below.

2. Connect the drain hose into the drain

vent.

chassis

outdoor drain joint

Drain hose

drain vent

1. Place the outdoor unit on the

support.

2. Fix the foot holes of outdoor unit

with bolts.

foot holes