Single Zone Energy Star IDU Owners Manual

Hex nut diameter

15~20

30~40

45~55

70~75

Tightening torque (N m)

All wires of indoor unit and outdoor unit should be

If the length of power connection wire is insufficient,

Add insulating pipe in the indoor drain hose in order

For the air conditioner with plug, the plug should be

panel

drain hose

outlet pipe

tape

NOTE

NOTICE

Step 7:

Connect wire of indoor unit

For the air conditioner without plug, an air switch

screw

wiring cover

hole

power connection

wire

Step 6:

Install drain hose

Bind the joint with tape

indoor unit

Wrap the indoor pipe and joint of connection

pipe with insulating pipe, and then wrap it

with tape

insulating pipe

drain hose

Open the panel, remove the screw on the wiring

cover and then take down the cover

Connect the drain hose to the outlet pipe of

outlet

pipe

drain hose

Make the power connection wire go through the

cable cross hole at the back of indoor unit and

then pull it out from the front side