BMKH24M-NDG3 Owners & Installation Manual

Blueridge Owners Manual

Document Version: 11/2016

Installation of a Single Zone Outdoor Unit

Mechanical Installation of the Outdoor Unit

Select a Location

Connect the Drain Joint (Optional)

• Select the outdoor unit’s installation location based on the home’s struc-

ture, local codes, and convenience of installation. (See Page 8)

• Ideally, these outdoor units are installed in a location that is well venti-

lated and dry, in which the outdoor unit will not be exposed directly to

sunlight and wind.

• Reference the Indoor and Outdoor Installation Clearances page and com-

ply with these clearances.

• Connect the outdoor drain joint into the

hole on the bottom of the outdoor unit’s

chassis.

• Connect the drain hose to this drain joint

and direct the flow of condesation where-

ever desired.

• While this step is optional, if it is not com-

pleted, the condensation from the unit will

simply drip out the bottom of the outdoor

unit.

Underside view of where

outdoor drain joint will

connect to bottom of

outdoor unit

Chassis

(Base Outdoor Unit)

Outdoor Drain Joint

Drain HoseDrain Vent

Outdoor Unit

Installation of a Single Zone Outdoor Unit