BMKH24M-NDG3 Owners & Installation Manual

Blueridge Owners Manual

Document Version: 11/2016

Copper Line Presentation

• The copper lines should be run along the wall and as hidden as possible.

Minimum semi diameter of bending the pipe is 4 inches.

• If the outdoor unit is higher than the wall piping hole, a U-Shaped curve

should be bent into the copper lines before the pipe goes into the wall.

This prevents moisture from running down the lines and into the condi-

tioned space.

• Lineset covers are sold as the optimal accessory, which cover the copper

lines, drain tubing, and multiconductor wire. These sets are fully custom-

izable, and in most cases, can be painted to match the exterior of the

home.

Installation of a Multi Zone Outdoor Unit