BMKH24M-NDG3 Owners & Installation Manual

Blueridge Owners Manual

Document Version: 11/2016

FAN Button

+/- Button

Pressing this button can select the fan speed circularly as AUTO, SPEED 1( ),

SPEED 2( ), SPEED 3 ( ), SPEED 4 ( ).

• Pressing the + or - button once will increase or decrease set temperature

by 1

F (

C). Hold the + or - button on the remote controller to choose

temperature quickly. Release the button after your desired set tempera-

ture is reached.

• When setting Timer On or Timer Off, press + or - button to adjust the

time. (See TIMER Button for setting details)

• When selecting dry mode, the air handler will run in air conditioning,

but with a low fan sped to remove excess humidity. In dry mode, the fan

speed cannot be adjusted.

• When selecting fan mode, the air handler will only operate the fan. Press

the FAN button to adjust the fan speed.

• When selecting heat mode, the air handler provides heat. Press + or -

button to adjust the set temperature. Press the FAN button to adjust the

fan speed.

15 SEER Unit Remote

NOTE

• When starting heating mode, the indoor unit will delay 1-5

minutes before warm air will flow (actual delay time will de-

pend on indoor ambient temperature).

• Set temperature range from remote controller: 60.8 - 86

F ;

Fan speed: auto, low speed, medium speed, high speed.