BMKH24M-NDG3 Owners & Installation Manual

Blueridge Owners Manual

Document Version: 11/2016

Child lock function

Temperature display switchover function

Press the “+” and “-” buttons simultaneously to turn on or turn off the child

lock function. When the child lock function is started up, LOCK indicator on

remote controller is ON. If any buttons are pressed while the lock indicator is

ON, the remote controller will not send the signal.

1. Once the power is connected, Press the ON/OFF button on the remote

controller to power the unit on.

2. Press the “MODE” button to select your desired mode: AUTO, COOL, DRY,

FAN, HEAT.

3. Press the “+” or “-” button to set your desired temperature. (Temperature

cannot be adjusted under auto mode).

4. Press the “FAN” button to set your desired fan speed: auto, low, medium,

and high speed.

5. Press the “SWING” button to select the fan blowing angle.

Pressing “-” and “MODE” buttons simultaneously will change the remote back

and forth from

C and

F. The unit most be OFF for this function to work.

Function for combination buttons

Operation Guide

15 SEER Unit Remote