BMKH24M-NDG3 Owners & Installation Manual
Blueridge Owners Manual
40
Document Version: 11/2016
Copyright 2016 Alpine Home Air Products
Press this button to turn the air handler on and off. After turning on the air
conditioner, operation indicator “ “ on the indoor unit’s display is ON (green
indicator - the color is different for different models), and the indoor unit will
make a sound.
• When selecting auto mode, the air handler will operate according to am-
bient temperature. The set temperature are 77
o
F for cooling and 68
o
F for
heating and cannot be adjusted or displayed. Press the “FAN” button to
adjust the fan speed and press “ “ to adjust the blowing angle.
NOTE
• When the power is connected (stand by condition), you can
operate the air conditioner using the remote control.
• When the unit is on, each time you press a button on the
remote controller, the sending signal icon “ “ on the display
of remote control will blink once. If the air conditioner beeps,
that means the signal has been sent.
• When unit is off, set temperature will be displayed on remote
controller (If the light of indoor unit is turned on, the corre-
sponding icon will be displayed); When the unit is on, it will
display the icon of the on-going function.
On/Off Button
MODE Button
Press the mode button to select your required operation mode.
Buttons on Remote Control
1
2
AUTO
COOL
DRY
FAN
HEAT
Multizone, 18, 20, and 22 SEER Remotes