BMKH24M-NDG3 Owners & Installation Manual
Blueridge Owners Manual
42
Document Version: 11/2016
Copyright 2016 Alpine Home Air Products
3
+/- Button
• Press the “+” or “-” buttons once to increase or decrease the set tempera-
ture 1
o
F. Hold the “+” or “-” button on the remote controller to change the
temperature quickly. Release the button after your desired temperature
is reached. (Temperature cannot be adjusted under auto mode).
• When setting the TIMER ON, TIMER OFF or CLOCK, press “+” or “-” button
to adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons).
4
5
FAN Button
Button
Pressing this button can select the fan speed circularly as AUTO, SPEED 1( ),
SPEED 2( ), SPEED 3 ( ), SPEED 4 ( ).
This button selects the swing angle. The fan blow angle can be selected circu-
larly as below:
AUTO
NOTE
• Under Auto speed, the air handler will select a proper fan
speed automatically according to the ambient temperature.
• Fan speed on dry mode is low speed.
no display
(horizontal louvers stops
at current position)
Multizone, 18, 20, and 22 SEER Remotes