BMKH24M-NDG3 Owners & Installation Manual

Blueridge Owners Manual
47
Document Version: 11/2016
Copyright 2016 Alpine Home Air Products
12
LIGHT Button
Press the light button to turn off the display on the indoor unit. The “ “ icon
on the remote controller will disappear. Press this button again to turn on the
display light. The “ “ icon will display once again.
Multizone, 18, 20, and 22 SEER Remotes
In Cool or Dry modes: The unit will run at current room setpoint for 1 hour.
After 1 hour, the setpoint will increase by 2
o
F. After 2 hours, the setpoint will
increase by 4
o
F and maintain this setpoint until Sleep Mode is cancelled.
In Heat Mode: The unit will run at current room setpoint for 1 hour. After 1
hour, the setpoint will decrease by 2
o
F. After 2 hours, the setpoint will de-
crease by 4
o
F and maintain this setpoint until Sleep Mode is cancelled.
1
2
Child lock function
Temperature display switchover function
Press the “+” and “-” buttons simultaneously to toggle the child lock function.
When the child lock function is on, the “ “ icon is displayed on the remote
controller. If any buttons are pressed while the remote controller is locked,
the “ “ icon will blink three times without sending the signal to the unit.
If the unit is off, pressing the “-” button and “MODE” buttons simultaneously
will toggle between
o
C and
o
F.
Function for combination buttons