BMKH24M-NDG3 Owners & Installation Manual

Blueridge Owners Manual
51
Document Version: 11/2016
Copyright 2016 Alpine Home Air Products
13
Cleaning and Maintenance
1
Open Panel
Pull up on the front left and right of the
air handler’s cover as shown in figure 1
2
Remove Filter
Remove the filter as indicated in figure 2.
There are two filters, one on each side.
Press up on the middle tab on each filter
to take it out.
4
Reinstall Filter
Reinstall the filter making sure the filter’s
two tabs are in the correct place and the
middle of the filter is secured underneath
the white tab, then close the panel cover.
3
Clean Filter
• Use dust catcher or water to clean.
• When the filter is very dirty, the water
(below 113
o
F) to clean it, and then put
it in a shady and cool place to dry.
Figure 1
Figure 2
Figure 3
Figure 4
Cleaning and Maintenance