BMKH24M-NDG3 Owners & Installation Manual

Blueridge Owners Manual

Document Version: 11/2016

Flare the port

Flare the port with a flaring tool.

Note “A” is different according to the

diameter, refer to the table below

Outer Diameter

(mm)

A (mm)

Max Min

6-6.35 (1/4”) 1.3 0.7

9.52 (3/8”) 1.6 1.0

12-12.7 (1/2”) 1.8 1.0

15.8-16(5/8”) 2.4 2.2

Inspect

Check the quality of the flaring port. If there is any blemish, flare the port

again according to the steps above.

Expander

Pipe

“A” (Heightof pipe

above expander base)

Smooth Surface

The Length is Equal

Improper Expanding

Leaning Damaged

Surface

Crack Uneven

Thickness

Copper Line Flaring