Installation & Owners Manual 2017

Blueridge Owners Manual
23
Document Version: 01/2017
Copyright 2017 Alpine Home Air Products
9
Installation of a Multizone Outdoor Unit
Mechanical Installation of Multizone Outdoor Unit
1
Choose a Location
Select the outdoor unit’s installation location based on the home’s struc-
ture, local codes, and convenience of installation.
Ideally, these outdoor units are installed in a location that is well venti-
lated and dry, in which the outdoor unit will not be exposed directly to
sunlight and wind.
Comply with the Indoor and Outdoor Installation Clearances on page 9.
2
Connect the Drain Joint (Optional)
Connect the outdoor drain joint into
the hole on the bottom of the out-
door unit’s chassis.
Connect the drain hose to this drain
joint and direct the flow of condesa-
tion where desired.
While this step is optional, if it is not
completed, the condensation from
the unit will simply drip out the bot-
tom of the outdoor unit.
Underside view of where
outdoor drain joint will
connect to bottom of
outdoor unit
Chassis
(Base Outdoor Unit)
Outdoor Drain Joint
Drain HoseDrain Vent
Outdoor Unit
Img 10 | Location of Drain Joint
Installation of a Multi Zone Outdoor Unit