Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

Copper Line Presentation

• The copper lines should be run along the wall and as hidden as possible.

Minimum semi diameter of bending the pipe is 4 inches.

• If the outdoor unit is higher than the wall piping hole, a U-Shaped curve

should be bent into the copper lines before the pipe goes into the wall.

This prevents moisture from running down the lines and into the condi-

tioned space.

• Lineset covers are the optimal accessory for covering copper lines, drain

tubing, and multiconductor wire. These sets are fully customizable, and

can be painted to match the exterior of the home.

Installation of a Multi Zone Outdoor Unit