Installation & Owners Manual 2017
Blueridge Owners Manual
35
Document Version: 01/2017
Copyright 2017 Alpine Home Air Products
NOTE
• Under Auto speed, air conditioner will select proper fan speed
automatically according to ambient temperature.
• Fan speed cannot be adjusted under Dry Mode.
5
SWING Button
Press this button to automatically swing the louvers up and down for better
cooling and heat distribution.
4
3
FAN Button
+/- Button
Pressing this button can select the fan speed circularly as AUTO, SPEED 1( ),
SPEED 2( ), SPEED 3 ( ), SPEED 4 ( ).
• Pressing the + or - button once will increase or decrease set temperature
by 1
o
F (
o
C). Hold the + or - button on the remote controller to choose
temperature quickly. Release the button after your desired set tempera-
ture is reached.
• When setting Timer On or Timer Off, press + or - button to adjust the
time. (See TIMER Button for setting details)
AUTO
15 SEER Unit Remote
NOTE
• When starting heating mode, the indoor unit will delay 1-5
minutes before warm air will flow (actual delay time will de-
pend on indoor ambient temperature).
• Set temperature range from remote controller: 60.8 - 86
o
F ;
Fan speed: auto, low speed, medium speed, high speed.