Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

NOTE

• Range of time setting is: 0.5-24h.

• The interval between two motions can’t exceed 5s, otherwise

the remote controller will exit setting status.

Child lock function

Temperature display switchover function

Press the “+” and “-” buttons simultaneously to turn on or turn off the child

lock function. When the child lock function is started up, LOCK indicator on

remote controller is ON. If any buttons are pressed while the lock indicator is

ON, the remote controller will not send the signal.

Pressing “-” and “MODE” buttons simultaneously will change the remote back

and forth from

C and

F. The unit most be OFF for this function to work.

Function for combination buttons

15 SEER Unit Remote

• Whenever the unit is OFF, pressing the timer button will automatically

turn the unit ON after a specified amount of time. T-ON and H icon will be

blinking. Within 5s, press the + or - button to adjust the time for Timer

On. Pressing + or - button once will increase or decrease the time by

0.5h. Hold the + or - button for 2s and the time will change quickly. Re-

lease the button after your required set time is reached. Then press the

TIMER button to confirm the set time. T-ON and H icon will stop blinking.

• Cancel Timer On/Off: If the Timer function is set up, press the TIMER but-