Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

Multizone, 18, 20, and 22 SEER Remotes

• When selecting “ “, the air handler’s horizontal louver will automatically

swing up & down at maximum angle.

• When selecting “ , , , , “, the air handler’s louver will stop at the

fixed position.

• When selecting “ , , “, the air handler’s louver will send air at the fixed

angle.

• Hold the “ “ button for 2s to set your desired swing angle. Release the

button once you are satisfied with the louver’s position.

NOTE

“ , , “ may not be available. The air handler receives this signal,

the air conditioner will blow fan automatically.

CLOCK Button

Press this button to set the clock time. “ “ icon on remote controller will

blink. Press the “+” or “-” button within 5s to set clock time. Each pressing

of the “+” or “-” button will cause the clock time to increase or decrease 1

minute. If the “+” or “-” button are held longer than 2s time will change quickly.

Release this button when you reach your desired temperature. Press the

“CLOCK” button to confirm the time. “ “ icon stops blinking.

NOTE

• Clock time adopts 24-hour mode.

• The interval between two operations cannot exceed 5s, other-

wise, remote controller will quit setting status. Operation for

TIMER ON/TIMER OFF is the same.