Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

Multizone, 18, 20, and 22 SEER Remotes

X-FAN Button

TEMP Button

Press this button under cool and dry mode to start up x-fan function, and

the “ “ icon will display on the remote controller. Press the button again to

cancel x-fan function, and the “ “ will disappear.

By pressing the Temp button, you can see the indoor set temperature, indoor

ambient temperature, or outdoor ambient temperature on indoor unit’s dis-

play. The setting on the remote controller is selected circularly as below:

• When selecting “ “ or no display with the remote controller, the tem-

perature indicator on the indoor unit displays the set temperature.

• When selecting “ “ with the remote controller, the temperature indicator

on the indoor unit display will show the indoor unit ambient temperature.

• When Selecting “ “ with the remote controller, the temperature indicator

on the indoor unit display will show the outdoor ambient temperature.

NOTE

• When the x-fan function is on, if the air conditioner is turned

off, the indoor fan will still operate on low speed for a few

minutes to blow the residual water inside the air duct.

• During x-fan operation, press the X-FAN button to turn off the

x-fan function. Indoor fan will stop operation immediately.

no display