Installation & Owners Manual 2017

Blueridge Owners Manual

Document Version: 01/2017

• The outdoor temperature display is not available for some

models. If the indoor unit receives “ “ signal, it will display the

indoor set temperature.

• The default display will show the set temperature when the

unit is pressed on.

• When selecting the indoor or outdoor’s ambient temperature,

the display will show the selected valve for 3 seconds and

return back to the set temperature.

NOTE

TURBO Button

SLEEP Button

Under COOL or HEAT mode, press the Turbo button to engage the quick

COOL or quick HEAT mode. The “ “ icon is displayed on the remote con-

troller. Press this button again to exit the turbo mode and the “ “ icon will

disappear.

Under COOL, HEAT, or DRY mode, press the sleep button to start the sleep

function. The “ “ icon is displayed on the remote controller. Press this but-

ton again to the cancel sleep function and the “ “ icon will disappear.

SLEEP MODE

The unit will automatically adjust to room temperature during your sleep

time. This slight change in temperature will not affect your comfort level due

to natural effects that sleeping has on the body, but it will save on energy

consumption and lower your electric bill. Press the SLEEP button to select

Sleep Mode. The SLEEP icon will appear.

Multizone, 18, 20, and 22 SEER Remotes