Installation & Owners Manual 2017

Blueridge Owners Manual
48
Document Version: 01/2017
Copyright 2017 Alpine Home Air Products
Multizone, 18, 20, and 22 SEER Remotes
12
LIGHT Button
Press the light button to turn off the display on the indoor unit. The “ “ icon
on the remote controller will disappear. Press this button again to turn on the
display light. The “ “ icon will display once again.
In Cool or Dry modes: The unit will run at current room setpoint for 1 hour.
After 1 hour, the setpoint will increase by 2
o
F. After 2 hours, the setpoint will
increase by 4
o
F and maintain this setpoint until Sleep Mode is cancelled.
In Heat Mode: The unit will run at current room setpoint for 1 hour. After 1
hour, the setpoint will decrease by 2
o
F. After 2 hours, the setpoint will de-
crease by 4
o
F and maintain this setpoint until Sleep Mode is cancelled.
1
2
Child lock function
Temperature display switchover function
Press the “+” and “-” buttons simultaneously to toggle the child lock function.
When the child lock function is on, the “ “ icon is displayed on the remote
controller. If any buttons are pressed while the remote controller is locked,
the “ “ icon will blink three times without sending the signal to the unit.
If the unit is off, pressing the “-” button and “MODE” buttons simultaneously
will toggle between
o
C and
o
F.
Function for combination buttons