BMKH18M-NDG3 & BMKH30M-NDG3 Owners and Installation Manual

Blueridge Owners Manual

Document Version: 11/2016

NOTE

• Range of time setting is: 0.5-24h.

• The interval between two motions can’t exceed 5s, otherwise

the remote controller will exit setting status.

15 SEER Unit Remote

TIMER Button

• When the unit is on, press the timer button to set Timer Off. T-OFF and H

icon will be blinking. Within 5s, press the + or - button to adjust the time

for Timer Off. Pressing + or - button once will increase or decrease the

time by 0.5h. Hold the + or - button for 2s and the time will change quick-

ly. Release the button after your required set time is reached. Then press

TIMER button to confirm the set time. T-OFF and H icon will stop blinking.

• When the unit is off, press the timer button to set Timer On. T-ON and

H icon will be blinking. Within 5s, press the + or - button to adjust the

time for Timer On. Pressing + or - button once will increase or decrease

the time by 0.5h. Hold the + or - button for 2s and the time will change

quickly. Release the button after your required set time is reached. Then

press the TIMER button to confirm the set time. T-ON and H icon will stop

blinking.

• Cancel Timer On/Off: If the Timer function is set up, press the TIMER but-

ton once to review the remaining time. Within 5s, press the TIMER button

again to cancel this funtion.