BMKH18M-NDG3 & BMKH30M-NDG3 Owners and Installation Manual

Blueridge Owners Manual

Document Version: 11/2016

• After selecting cool mode, the air handler will operate under cool mode.

Cool indicator “ “ on indoor unit is ON. Press “+” or “-” button to adjust

the set temperature. Press the “FAN” button to adjust the fan speed.

Press “ “ button to adjust the fan blowing angle.

• When selecting dry mode, the air handler will operate in air condition-

ing, but with a low fan speed to remove excessive humidity. Dry indicator

“ “ on indoor unit is ON. In dry mode, the fan speed cannot be adjusted.

Press “ “ button to adjust the blowing angle.

• When selecting fan mode, the air handler will operate the fan. All indica-

tors are OFF, but operation indicator lights are ON. Press the “FAN” but-

ton to adjust the fan speed. Press “ “ button to adjust the blowing angle.

• When selecting heating mode, the air handler will provide heating. The

Heat indicator “ “ on indoor unit is ON. Press the “+” or “-” buttons to ad-

just the set temperature. Press the “FAN” button to adjust the fan speed.

Press “ “ button to adjust the fan blowing angle.

NOTE

• When starting heating mode, the indoor unit will delay 1-5

minutes before warm air will flow (actual delay time will de-

pend on indoor ambient temperature).

• Set temperature range from remote controller: 60.8 - 86

F ;

Fan speed: auto, low speed, medium speed, high speed.

Multizone, 18, 20, and 22 SEER Remotes