LM Wall Mount User Manual

9
●
●
button
●
●
NOTE
●
●
NOTE
LIGHT
button
CLOCK
button
TIMER
ON
TIMER
OFF
Press this button to turn off display light on indoor
unit. " " icon on remote controller disappears.
Press this button again to turn on display light.
" " icon is displayed.
Clock time adopts 24-hour mode.
The int erval between two operations can
't exceed 5s.
Otherwise, remote controller w ill quit setting status.
Operation for TIMER ON/TIMER OFF is the same.
Press this button to set clock time. " " icon on
remote controller will blink. Press "▲" or "▼" button
within 5s to set clock time. Each pressing of "▲" or
"▼" button, clock time will increase or decrease 1
minute. If hold "▲" or "▼" button, 2s later, time will
change quickly. Release this button when reaching
your required time. Press "CLOCK" button to confirm
the time. " " icon stops blinking.
"TIMER OFF" button can set the time for time r
off. After pressing this button, " " icon disap-
pears an d the word "OFF" on remote controller
blinks. Press "▲" or "▼" button to adjust TIMER
OFF setting. After each pressing "▲" or "▼"
button, TIMER OFF setting will increase or
decrease 1min. Holding "▲" or "▼" b
utton, 2s
later, the time wi ll change quickly until reaching
your required time.
Press "TIMER OFF" and the word "OFF" will
stop blinking. " " icon resumes displaying.
Under the condition that TIMER OFF is started
up, press "TIMER OFF" button to cancel it.
TIMER ON button
●
TIMER OFF button
Under on and off status, you can set T IMER OFF or
TIMER ON simultaneously.
Before setting TIMER ON or TIM ER OFF, please
adjust the clock time.
After starti ng up TIMER ON or TIMER OFF, set the
constant circulat ing valid. After that, air conditioner
will be turned on or turned off according to setting
time. " " button has no effect to setting. If this func-
tion is not required, use the remote controller to
cancel it.
"TIMER ON" button can set the time for timer
on. After pressing this button, " " icon disap-
pea rs and the word "ON" on remote controller
blinks. Press "▲" or "▼" button to adjust TIMER
ON setting. After each pressing "▲" or "▼"
button. TIMER ON setting will increase or
button
This function is only available for some models.
●
NOTE
WiFi
Energy-saving function
Function introduction for
combination buttons
Under cooling mode, press "TEMP" and "CLOCK"
butto ns simultaneously to start up or turn off ener-
gy-saving function. When energy-saving function
is started up, "SE" will be shown on remote con-
troller, and air conditioner will a djust the set tem-
perature automatically according to ex-factory
setting to reach to the best energy-saving effe ct.
P ress " TEMP" and "CLOCK" buttons simultane-
ously again to exit energy-saving function.
decrease 1min. Holding "▲" or "▼" b
utton, 2s
later, the time will change quickly until reaching
your required time.
Press "TIMER ON" to confirm it. The word "ON"
will stop bli nking. " " icon resumes displaying.
Cancel TIMER ON: Under the condition that
TIMER ON is started up, press "TIMER ON"
button to cancel it.
Press " WiFi " button to turn on WiFi function,
" WiFi " icon will be displayed on the remote con-
troller.
Hold " WiFi " button for 5s to turn off WiFi function
and " WiFi " icon will disappear.
Under off status, press "MODE" and " WiFi "
buttons simultaneously for 1s, WiFi module will
restore factory settings.