BPRPGE14 Manual

ManualsBrandsBlueridge Manuals14 seer2 Ton Cooling 54,000 BTU Heating 14 SEER Gas Package Unit

507302B01 Page 1 of 6Issue 2122

Congratulations...

...your outdoor heating/cooling package unit is a valuable

piece of equipment, designed and manufactured by the most

modern methods. Proper care of your unit should result in

many years of service and comfort.

To keep your operating costs low and to eliminate

unnecessary service calls, we have provided a few

guidelines. These guidelines will help you understand how

your heating/cooling unit operates and how to maintain it

so you can get years of safe and dependable service. Read

all the instructions in this manual, and keep all manuals for

future reference.

TABLE OF CONTENTS

IMPORTANT SAFETY INFORMATION .................2

OPERATING YOUR UNIT .....................................3

MAINTENANCE OF YOUR UNIT ..........................4

FILTER .................................................................5

BURNER FLAME ..................................................6

– Do not store or use gasoline or other

ammable vapors and liquids in the vicinity

of this or any other appliance.

– What to do if you smell gas:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use

any phone in your building.

• Immediately call your gas supplier from a

neighbor’s phone. Follow the gas supplier’s

instructions.

• If you cannot reach the gas supplier, call the

re department.

– Installation and service must be performed

by a qualied installer, service agency or the

gas supplier.

Failure to follow the safety warnings

exactly could result in serious injury,

death, or property damage.

FIRE OR EXPLOSION HAZARD

WARNING

Save these instructions for future reference

USER’S INFORMATION MANUAL

Gas Heating/Electric Cooling

Package Unit

Manufactured By

Blue Summit LLC

8201 C National Turnpike

Louisville, KY 40214

(P) 507302B01

*P507302B01*

Summary of content (6 pages)

PAGE 1
USER’S INFORMATION MANUAL Gas Heating/Electric Cooling Package Unit Save these instructions for future reference Congratulations... ...your outdoor heating/cooling package unit is a valuable piece of equipment, designed and manufactured by the most modern methods. Proper care of your unit should result in many years of service and comfort. To keep your operating costs low and to eliminate unnecessary service calls, we have provided a few guidelines.
PAGE 2
IMPORTANT SAFETY INFORMATION automatically lights the burners. See OPERATING YOUR UNIT on page 3 for information on lighting and shutting down the unit. WARNING ELECTRICAL SHOCK, FIRE, OR EXPLOSION HAZARD 4. Should the gas supply fail to shut off or if overheating occurs, shut off the gas valve to the unit before shutting off the electrical supply. Failure to follow the safety warnings exactly could result in dangerous operation, serious injury, death, or property damage. 5.
PAGE 3
OPERATING YOUR UNIT These units are equipped with an ignition device which automatically lights the burners. Do not try to light the burners by hand. 7. Wait 5 minutes to clear out any gas, then smell for gas (including at the bottom of the unit near the ground). If you smell gas, stop and follow the directions in WHAT TO DO IF YOU SMELL GAS on page 1. If you don’t smell gas, continue to next step. Before operating, smell around furnace area for gas.
PAGE 4
Temperature Control There are many types and styles of thermostats. However, almost all thermostats perform the same basic functions described in the following section. MAINTENANCE OF YOUR UNIT Thermostat Operation There are two switches located on the thermostat. One switch controls the heating and cooling functions. The other switch is for “FAN” operation, either continuous or automatic. On the thermostat is the temperature range for the heating temperature and the cooling temperature desired.
PAGE 5
burner does not ignite, contact a qualified service technician for assistance. Contact your dealer if you desire more information about this important safety feature. Should you observe unusual amounts of any of the following conditions, it is important that you call your authorized dealer at once to obtain a qualified service inspection: Should any unusual conditions be observed during your inspections, call an authorized service dealer immediately.
PAGE 6
Outdoor Coil Leaves and other large obstructions should be carefully removed from the outdoor coil surfaces without damaging the fin surface of the coil. Owner Record Model #__________________________________ Lubrication Lubrication of the bearings in the circulating air blower motor and the combustion blower motor is not recommended. Blower Assembly Even with good filters properly in place, blower wheels and motors will become dust laden after long months of operation.