BPRPHP14 Spec Sheets

ManualsBrandsBlueridge Manuals14 seer4 Ton Cooling 45,000 BTU Heating 14 SEER Packaged Heat Pump

PRPHP14

PRODUCT SPECIFICATIONS

14 SEER HEAT PUMP

PACKAGED UNIT

FORM NO. PRPHP14-100 (01/2021)

Page 1

REFRIGERANT SYSTEM

• Environmentally friendly R410A refrigerant

• Copper tubing with enhanced fin coils

• Internal service gauge ports

• Sleeved distributor tubes

• Antimicrobial insulated drain pan

• High and Low Threaded pressure switches for system protection

CABINET CONSTRUCTION

• Heavy-gauge galvanized steel base rails with rigging holes

• Rounded corners for safety and an attractive, clean appearance

• One piece base design for strength and stability

• Condensate and coil runoff drains to the perimeter of the unit

• Horizontal and downflow duct openings are flanged to minimize

water entry

• Low profile, with compact footprint

• Insulation to minimize heat loss plus reduce sound

• Textured pre-painted steel cabinet finish

• Superior service access to components

• Louvered coil guard protection

• One piece “no leak” top design

BLOWER

• Insulated compartment to reduce sound

• Efficient constant torque motor for wide airflow range

• Slide out blower housing for easy service

CONTROLS

• Integrated control with L.E.D. self diagostics

• Defrost control board with field selectable time intervals

• Built in short cycle protection to protect compressor

• Built in “quiet shift” operation during defrost on select models

INSTALLATION

• Horizontal or down discharge capable

• Horizontal and downflow duct covers provided with unit for

installation flexibility

• Drain pan float switch monitors condensate level in drain pan and

shuts down unit if drain becomes clogged

• Utility connections on “right side”

• Kits enable bottom gas and power entry through base pan

ACCESSORIES

• Clip roof curbs and adjustable pitch roof curbs available

• Internal filter kits

• Electric strip heat with optional single point power entry (side

entry only)

• Duct adapters

• Closure kit for base rail openings

WARRANTY

10 year limited parts and compressor warranty. See limited

warranty document for details.

Summary of content (12 pages)

PAGE 1
PRPHP14 14 SEER HEAT PUMP PACKAGED UNIT PRODUCT SPECIFICATIONS FORM NO.
PAGE 2
HEAT PUMP PACKAGED UNIT PRPHP14 MODEL NUMBER GUIDE PRP HP 14 36 E P -1 A Premium Residential Package Unit Minor Revision Code Unit Type HP = Heat Pump Major Revision Code Voltage SEER Family ECM - Constant Torque Tonnage: 24, 30, 36, 42, 48, 60 ELECTRICAL AND PHYSICAL DATA Model Voltage Phase Hz Min Volts MCA @ 60 hz Max Fuse/ HACR Breaker Compressor Condenser Motor RLA LRA RLA PRPHP1424 17.4 25 12.1 59.3 PRPHP1430 21.9 35 15 72.5 23.4 35 14.7 75 27.
PAGE 3
HEAT PUMP PACKAGED UNIT PRPHP14 BLOWER PERFORMANCE Model Blower Tap TAP 1 PRPHP1424 PRPHP1430 PRPHP1436 PRPHP1442 PRPHP1448 PRPHP1460 CFM @ ext. Static Pressure in in. wc without filter, dry coil 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.
PAGE 4
HEAT PUMP PACKAGED UNIT PRPHP14 HEAT STRIP ELECTRICAL Model Heater 5kW 7.5kW PRPHP1424EP 10kW 15kW 20kW 5kW 7.5kW PRPHP1430EP 10kW 15kW 20kW 5kW 7.5kW PRPHP1436EP 10kW 15kW 20kW 5kW 7.5kW PRPHP1442EP 10kW 15kW 20kW Unit Supply Voltage Single Phase Input kW 240V Ampacity Breaker Ampacity Breaker 240 5 29.5 30 - 208 3.8 26.1 30 - 240 7.5 42.6 45 208 5.6 37.4 40 Circuit 1 240V Circuit 2 240V Single Circuit 240V Ampacity Breaker - 43.4 45 - 40.0 45 - - 56.
PAGE 5
HEAT PUMP PACKAGED UNIT PRPHP14 HEAT STRIP ELECTRICAL Model Heater Unit Supply Voltage Single Phase 5kW 7.5kW PRPHP1448EP 10kW 15kW 20kW 5kW 7.5kW PRPHP1460EP 10kW 15kW 20kW Input kW 240V Ampacity Breaker Ampacity Breaker Ampacity Breaker 240 5 33.5 35 - - 54.8 60 208 3.8 30.1 35 - - 51.3 60 240 7.5 46.6 50 - - 67.8 70 208 5.6 41.4 45 - - 62.6 70 240 10 59.6 60 - - 80.8 90 208 7.5 52.6 60 - - 73.9 80 240 15 59.6 60 26.0 30 106.
PAGE 6
HEAT PUMP PACKAGED UNIT PRPHP14 DIMENSIONS (IN.) - SMALL BASE 47.66 2.33 11.49 TOP VIEW 2.48 1.98 16.77 14.02 RETURN AIR SUPPLY AIR 47.66 2.33 11.49 16.07 18.52 POWER ENTRY POWER ENTRY 6.94 3.25 20.31 4.56 21.06 23.19 SIDE VIEWS CONDENSATE DRAIN 3/4 NPT 40.89 21.63 13.21 TYPICAL DRAIN LOCATION 3.87 13.44 POWER ENTRY 1-1/8 DIA. KNOCKOUT 3.62 13.44 LOW VOLTAGE ENTRY 7/8 DIA. KNOCKOUT 34.19 29.59 17.07 14.32 12.12 6.20 3.07 ELECTRIC HEAT POWER ENTRY 5.86 6.20 4.
PAGE 7
HEAT PUMP PACKAGED UNIT PRPHP14 DIMENSIONS (IN.) - LARGE BASE 56.13 2.11 2.33 11.49 TOP VIEW 2.39 19.49 19.49 RETURN AIR SUPPLY AIR 2.33 11.49 47.66 16.07 18.52 POWER ENTRY POWER ENTRY 6.94 3.25 10.06 25.81 26.56 SIDE VIEWS 28.68 44.89 21.63 CONDENSATE DRAIN 3/4 NPT 13.21 TYPICAL DRAIN LOCATION 18.19 18.19 3.87 POWER ENTRY 1-1/8 DIA. KNOCKOUT 3.62 LOW VOLTAGE ENTRY 7/8 DIA. KNOCKOUT 4.06 33.59 17.07 14.32 38.19 12.14 4.20 6.20 6.20 3.
PAGE 8
HEAT PUMP PACKAGED UNIT PRPHP14 ROOF CURB DIMENSIONS - SMALL BASE 3/4 (19) RETURN OPENING Opening for Power Entry Through Unit Base 5-1/2 x 5-5/8 in. (140 x 31 mm) 44-3/8 (1127) 16-7/8 (429) 11-1/2 (287) Insulated Panels 5-3/4 (146) 1( 25 ) 5-1/2 (140) 44-3/8 (1127) Opening for Power Entry Through Unit Base 3 x 13 in. (76 x 330 mm) 3 (76) 17-1/4 (438) 13 (330) 1-3/8 (35) 3-3/4 (95) NOTE - Roof deck may be omitted within confines of curb.
PAGE 9
HEAT PUMP PACKAGED UNIT PRPHP14 ROOF CURB DIMENSIONS - LARGE BASE 3/4 (19) Opening for Power Entry Through Unit Base 5-1/2 x 5-5/8 in. (140 x 31 mm) 44-3/8 (1127) 1( Insulated Panels 19-1/2 (380) 11-1/2 (287) 2-1/8 (54) 25 RETURN OPENING ) SUPPLY OPENING 22-7/8 (581) 52-7/8 (1343) 3-3/4 (95) 7( 17 8) Opening for Power Entry Through Unit Base 3 x 13 in. (76 x 330 mm) NOTE - Roof deck may be omitted within confines of curb.
PAGE 10
HEAT PUMP PACKAGED UNIT PRPHP14 ADJUSTABLE CURB DIMENSIONS - SMALL BASE CLIPLOCK CORNER DETAIL Top Edge Wood Nailer Strip CURB PROFILE Bottom Flange 1 1/2 Typical Slot Typical Locking Tab NOTE: See Cliplock 1000 installation instructions for complete assembly and installation procedures and requirements.
PAGE 11
HEAT PUMP PACKAGED UNIT PRPHP14 ADJUSTABLE CURB DIMENSIONS - LARGE BASE CLIPLOCK CORNER DETAIL Top Edge Wood Nailer Strip Bottom Flange CURB PROFILE 1 Typical Slot 1/2 Typical Locking Tab NOTE: See Cliplock 1000 installation instructions for complete assembly and installation procedures and requirements.
PAGE 12
HEAT PUMP PACKAGED UNIT PRPHP14 ACCESSORIES Description Compressor Crankcase Heater Compressor Hard Start Kit Where Used Kit Number All 11X27 24, 30, 36 10J42 42, 48, 60 88M91 Compressor Timed-Off Control All 47J28 Electric Heater 5kW - PHK05BP All 10W47 Electric Heater 7.