Data Sheet
2/15/2018 Subsea LED Indicator Light
http://docs.bluerobotics.com/indicator/ 1/4
Subsea LED Indicator Light
Introduction
The Subsea LED Indicator is a simple LED light with high pressure capability! It comes in a penetrator form factor for easy
installation on any of our Watertight Enclosures and it comes in four colors: white, blue, green, and red! It operates on 3-
20v and each light draws up to 30mA when used at 20v. A built in resistor makes it easy to use without any additional
parts.
Quick Start
1. Connect the wires to a power source
White/Red/Green/Blue Wire: +3-20 volts (DC)
Black Wire: Ground
Specications
Specication Table
Electrical
Item Value
Supply Voltage (V ) 3 - 20 volts (DC)
Max Current TBD mA
Light
Maximum Brightness TBD mcd
Cable and Connectors
Cable Length 180 mm 7 in
Connectors Single 0.1” Male Header Pins
Wires Black - Ground
White/Red/Green/Blue - Power
in