Owners manual

MWS- 808
4
Operations
Note
THOROUGHLY READ THROUGH THE ENTIRE MANUAL BEFORE
OPERATING THIS MACHINE!
PURPOSE
Ø The purpose of the MWS-808 is to remove outer and inner jackets from wires and
cables in order to separate the inner copper or aluminum. These types of machines
are widely used in the recycling industry to extract copper and aluminum for
recycling.
Ø The wire jackets are also able to be recycled by many recyclers so inquire with your
local scrap buyers.
INSTALLATION
Ø Install the machine in a dry place.
Ø Bolt down or secure in some manner so as to be able to have access to both the front
wire inlets and the back wire outputs.
Ø Make certain the machine is firmly secure so it will not tip or fall.
OPERATIONAL PRINCIPLES
Ø This machine pulls wire into the machine across an assembly of a single cutting
channel and a single rolling channel.
Ø The main cutting blade shaft and main rolling shaft run inversely to create a
mechanism that pulls the wire into front of the machine.
Chapter
3