Owners manual

1206 TRIPOD STAND
2
Specifications
MECHANICAL DATA
Pipe Capacity
½” – 6”
Base
Cast Aluminum
Includes
Slot for Hanging Tools
Pipe Rest
Max Pipe Diameter
6” Max
Pipe Benders
3
Jack Screw
Yes
General Maintenance
Ø Keep device clean and free of debris.
Ø Check for misalignment, binding and breakage of all moving parts. If damaged, repair tool before use.
Ø Clean the stand of all dirt and oil as well as the teeth of the jaw with a wire brush. Replace teeth if dull to prevent pipe
slippage.
Ø Inspect chain to ensure there is no link damage or chain separation. Link damage indicates there has been an overload
on the chain and the chain should be replaced.
Ø Lubricate all moving parts and joints as necessary with oil and wipe and excess from the stand.
Chapter
2