Manualshelf

Owners manual

ManualsBrandsBLUEROCK Tools ManualsSpecialty Tool SetsBLUEROCK ® Tools 1/8" - 6" Pipe Chain Vice on Tripod Pipe Stand Model 618
12345678910
1206 TRIPOD STAND
3
Assembly Instructions
Ø Step 1) Insert rear leg assembly (part no. 15) into tray support (part no. 4) as shown in Fig 1. Tighten the set-screw (part no.
13) lightly at this time.
FIGURE 1
Ø Step 2) Slide front leg assembly (part no.14) into tray support, aligning holes in tool tray (part no.3) with holes in front leg
assembly. Slide tray pin (part no. 11) through the holes and fix with clip (part no. 12). See figure two below.
FIGURE 2
Ø Step 3) Place Base assembly (part no.1) upside down on ground or bench and place legs into the holes with Front leg
assembly (part no.14) toward jaws. Insert Leg bolts (part no.6), secure with nuts and lock-washers (part no. 7) see figure 3
below.
Chapter
3