Owners manual

TYP- 75 MAG DRILL

Ø DO NOT operate this machine on the same work surface where welding is being performed.

This could result in severe damage to the machine or personal injury to the user.

Ø DO NOT use this machine without the safety chain or safety strap.

Ø DO NOT operate this machine on a lower voltage as it may result in the electromagnet being

at a reduced power level and the machine could become unstable while cutting. This could

also limit the motor life.

o NOTE: Use of long small gauge power extension cords can result in decreased

voltage. As local voltages can vary, it may be a good idea to test the voltage at the

end of the extension cord to ensure proper voltage requirements are met. You might

also consult an electrician to make sure the length of cord matches up with the proper

wire gauge for this size motor. Make sure to use outdoor cords when operating

outdoors.