User Manual

- 6 -
Parameter BG190HDtwo
BG190Hdtwo
SPLASH
BG270HDtwo
BG270HDtwo
SPLASH
Nominal Voltage 14.4V 14.4V 14.4V 14.4V
Operating voltage range 10.8~16.8V 10.8~16.8V 10.8~16.8V 10.8~16.8V
Nominal Capacity 13.2Ah 13.2Ah 18Ah 18Ah
Nominal Energy 190Wh 190Wh 270Wh 266Wh
Max Continuous Discharge 12A 12A 12A 12A
Max D-TAP combined output 5A 5A 5A 5A
Operating Temp. -20° ~ +60
o
C -20° ~ +60
o
C -20° ~ +60
o
C -20° ~ +60
o
C
Wi-Fi module Wi-Fi 2.4 GHz - 802.11 b/g/n
IP rating IP54 IP65 IP54 IP65
Dimensions
(L x W x H) mm
(L x W x H) in
171x95x69
6.73x3.74x2.71
171x95x69
6.73x3.74x2.71
171x95x69
6.73x3.74x2.71
171x95x69
6.73x3.74x2.71
Weight (net) 1.62Kg(3.57lbs) 1.62Kg(3.57lbs) 1.62Kg(3.57lbs) 1.62Kg(3.57lbs)
Introduction
BLUESHAPE professional broadcast batteries use multiple lithium ion
rechargeable battery cells. These batteries are designed for use with
cameras and apparatus equipped with the 3-Stud mount.
Battery Features
 Robust thick-walled housing made of special plastic resin for superior
impact resistance. The battery can withstand several drops from
altitudes of up to 2 metres without breaking or suffering internal
damage.
 Water and dust ingress resistant construction (IP54 and IP65 for the
SPLASH models) for safe use, even in difficult environments.
 Compact size and lightweight. The external dimensions of the battery
have been optimised for maximum capacity in the space available.
 Only the best available components are used in the battery
construction for ensured longevity.
 Sophisticated factory programmed on-board electronics provide the
operator with full safety protection together with premium
performance and reliability.
 Advanced interior design permits easy servicing and restoration by
qualified BLUESHAPE service personnel.
 Dual D-TAP outputs, one overload-protected, one permitting charge.
A generous 70W can be tapped from the protected output. The D-tap
overload circuit runs independently from the main battery overload
protection.
 A 5-step LED indicator provides accurate remaining capacity
monitoring. Each LED accounts for 20% of state-of-charge; when the
capacity falls below 10%, the lower (first) LED blinks.
 No memory effect - batteries can be recharged at any time.