Two Kickstand Feet Two Kickstand Extenders Wall Mount Bracket Wall Mount Bracket Template
All-In-One Wireless Streaming Audio System
1 CHOOSE PLACEMENT 1 TABLETOP Place the PULSE SOUNDBAR on a flat surface. Attach the supplied Kickstand Feet. Depending on the speaker orientation, you may need to add Kickstand Extenders to ensure the Kickstand Feet are long enough to support your PULSE SOUNDBAR. 2 ON THE WALL Use the supplied wall mount bracket to attachthe PULSE SOUNDBAR to the wall. Refer to the wall mount bracket template sheet with instructions for mounting the PULSE SOUNDBAR.
2 CONNECT TO TV A Using the supplied RCA to RCA cable, connect the audio RCA output of your TV to the corresponding AUDIO IN (L/R) of PULSE SOUNDBAR. B Alternatively, if your TV is equipped with digital optical output, use an optical audio cable (not supplied) to connect the digital optical output of your TV to the corresponding OPTICAL IN of PULSE SOUNDBAR. 3 CONNECT TO POWER A Select the AC Power Cord appropriate for your region and plug it into the Player, and then into your wall outlet.
4 CONNECT TO WiFi Your PULSE SOUNDBAR emits its own WiFi signal when in Hotspot mode to make setup easier. Look for the solid green LED indicator on the front of the PULSE SOUNDBAR, which tells you it is in Hotspot mode. A. In the Settings menu of your tablet or smartphone, locate and select the WiFi Hotspot matching your PULSE SOUNDBAR’s network unique ID. The Network ID is displayed as follows: PULSESOUNDBARXXXX, where XXXX is the last four digits of the MAC (Machine Access Control) address. E.
5 DOWNLOAD THE APP AND CONNECT TO MUSIC A Download the BluOS Controller App. B Ensure your controller device is connected to the proper home network. C Follow the in-App prompts to finish setting up your PULSE SOUNDBAR. D Use the left-hand Navigation Drawer to add or select a music source. All BluOS Controller Apps for Apple iOS devices (iPhone, Pad, iPod), Android devices, Kindle Fire, and Windows or Mac desktops are available for download at www.bluesound.com/downloads. Visit www.bluesound.
© Bluesound International. Bluesound, the stylized wordmark and “B” logotype, the phrase “HiFi for a wireless generation”, PULSE SOUNDBAR and all other Bluesound product names and taglines are trademarks or registered trademarks of Bluesound International, a division of Lenbrook Industries Limited. All other logos and services are trademarks or service marks of their respective owners.
All-In-One Wireless Streaming Audio System Owner’s Manual The Bluesound PULSE SOUNDBAR is an all-in-one wireless streaming audio system that brings all your entertainment sources to life, delivering the best possible sound quality to TV shows, movies, games and more.
3 4 5 SUBW OUT R AUDIO IN L 6 OPTICAL IN USB 7 8 9 11 USB LAN STANDBY 100-240V~50/60Hz 10 2 1 1 STATUS INDICATOR Below is a table of the LED blink codes and their corresponding descriptions.
2 3 4 5 6 7 8 9 KICKSTAND FEET (REMOVABLE) :źbªźº£q}ªźÇźGX1N źN=X7 Jź°ªźÇÁź°ÖªŘźqÇÇq}źÇźÁ̺º£ź /}¡ÁÇqªź Çź°½źÁ̺º°½Çŝź ºªªź°ªźÇźÁºq¡½ź°½ªÇqÇ°ªŘźÜ°Ìź©qÜźªźÇ°źqź/}¡ÁÇqªź ÛǪ½Áź (supplied) to ensure the Kickstand Feet are long enough to support your PULSE SOUNDBAR. SUBW OUT : The SUBW OUT connection can be used with a subwoofer cable (not provided).
WARNING! THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-CREATE THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS NOT FUNCTIONING AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS OR CONCERNS CONTACT AN AUTHORISED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE PROCEEDING! Steps to Factory Reset: 1. Disconnect the player from electrical power. 2.
en I Mounting Instructions 1. Using this template, locate your desired PULSE SOUND BAR placement noting the required clearances. 2. Use a sharp object to mark mounting points for horizontal mounting on the wall, considering correct load-bearing and anchor requirements. Anchors and mounting hardware are not included. 3. Drill and install the required anchors for the corresponding screw size being used. At least 5mm (or #8) flathead steel screws are recommended. 4. Mount the bracket to the wall. 5.
Sound bar Clearance for installation I Degagement de la barre de son pour !' installation I Distancia libre para la instalaci6n de la Soundbar I Spazio necessaria per l'installazione della soundbar I Folgas para a i nstala~ao da barra de sam I Soundbar-Abstand fOr die Installation I Vrij rui mte voor Soundbar bij installatie 1 Fritt utrymme kring Soundbar for installation I 3a3op np111 ycraHOBKe Soundbar Top of Soundbar I Dessus de la barre de son I Parte superior de la Sound bar 1 Parte superiore della so
2
License Bluesound International, a division of Lenbrook Industries Limited ("Bluesound"), furnishes this Bluesound Software [defined to include the software embedded in your Bluesound product (as updated from time to time) and any desktop or handheld application portions of the software] and accompanying documentation, and licenses their use to you as provided in this Agreement.
Compliance With Copyright Laws You acknowledg·e that Bluesound owns all right, title and interest, in all copyrights, trade secrets, and intellectual property related to your Bluesound product, the Bluesound Software and accompanying documentation. Bluesound complies with U.S. and international copyright laws and in consideration of the license granted herein, you agree to do the same.
Limitation of Liability To the extent not prohibited by law, in no event will Bluesound or its suppliers be liable for personal injury or any damages whatsoever, including but not limited to, incidental, special, consequential, exemplary, or indirect damages, and including but not limited to, cost of cover, loss of data, loss of profits, business interruption, loss of business information, or other pecuniary loss arising from the use of (or inability to use} the product, no matter how caused and on any theo
Important Safety Instructions Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. _ Read instructions - All the safety and operating instructions should be read before the product is operated. _Retain instructions- The safety and operating instructions should be retained for Future reference. _ Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
_ Power Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. _Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
_ Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Caution To prevent electric shock, match wide blade of plug to wide slot, fully insert.
CAN ICS-3 (B)/NMB-3(8) This device complies with Industry Canada license-exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause Interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. _ no naked flame sources such as lighted candles should be placed on the apparatus; _ the use of apparatus in tropical climate This device complies with Part 15 of the FCC rules.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : SHOCK HAZARD - DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE- NE PAS OUVRIR THE LIGHTNING ~·LASH . .~ITH •Pt~~OVJ.H••§I'e· SY~.•~QL; · VJ.ITHIN .. AN . ..~QMI•LAT~BA~.TB'~·~~LE,IS 1 INTENDED TO ALERT Tl'fe·· u se.RTO THE'PRESENCE··' OfZ:UNINSUbATED• nDANtsERLJt.JS 'IOLTAGE ~ WITHIN THE PRODUCT'S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE TO ·· CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
Applies only to Bluesound NODE 2, POWERNODE 2, PULSE 2, PULSE MINI, PULSE FLEX and PULSE SOUNDBAR European union notice for wireless product ( E: Hereby, Lenbrook Industries Limited, declares that this Wireless Streaming Music Player/System is in compliance with The RED Directive (2014/53/EU), Low Voltage Directive (2014/35/EU) and other essential requirements. The declaration of conformity may be consulted at www.lenbrook.com/DoC.
End-users are exhorted not to dispose of waste batteries as unsorted municipal waste. In order to achieve a high level of recycling waste of batteries, discard waste batteries separately and properly through an accessible collection point in your vicinity. For more information about collection and recycling of waste batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.
~LUE:50UNC WARRANTY BLUESOUND INTERNATIONAL, a division of Lenbrook Industries Limited and its Authorized Distributors, warrants this component to be free from all defects in materials and workmanship as follows: Electronic components and Electro-mechanical products: Loudspeakers and subwoofer drivers: Powered speakers and subwoofers: One (1) year, parts & labor Five (5) years One (1) year This warranty is valid only in the country of purchase.