Full Specifications

WARNING!

Steps to Factory Reset:

1. Disconnect the player from electrical power.

2. Wait 10 seconds

3. Reconnect the power

4. The LED will ash Blue – once you see it turn Red, touch and hold the Play/Pause icon (it will

immediately turn Green and then back to Red) – do not let go of the LED.

5. Once the LED turns back to Red, continue to hold the button for 30 seconds.

6. After 30 seconds, the LED will begin to blink red – then release the button.

All customization to the Bluesound player will be removed and restored to factory settings.

IMPORTANT: Removing your nger from the LED at any time before the LED begins ashing red will cancel the

factory reset and leave the player in Upgrade Mode. Just start the steps again to factory reset the player.

You will know the factory reset is successful if the player returns to Hotspot mode (wireless connection - the

LED will turn solid green). If the player is connected to your network through a wired Ethernet connection, it will

simply connect as if it was a new player (LED will turn solid blue).

THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK

CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-CREATE

THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS NOT FUNCTIONING

AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS OR CONCERNS CONTACT

AN AUTHORIZED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE PROCEEDING!

“HiFi for a wireless generation”, PULSE MINI 2i and all other Bluesound product names and

taglines are trademarks or registered trademarks of Bluesound International, a division of

Lenbrook Industries Limited. All other logos and services are trademarks or service marks of

their respective owners.