Quick Start Guide
STANDING UPRIGHT
Attach the supplied magnetic rubber feet
to the magnetic area on the bottom of the
SUB+ to limit any unwanted vibrations.
WALL MOUNTED
The shaped groove in the circular feet on
the back of the SUB+ will help guide it
onto the supplied wall bracket.
LAYING FLAT
You can place the SUB+ on its back,even
under a sofa or table. The four rubber feet
on the back of the product will help limit
any unwanted vibrations.
CHOOSE PLACEMENT
WALL MOUNTING INSTRUCTIONS
The PULSE SUB+ design allows it to be wall mounted horizontally or vertically for wire
management. Ensure the selected locations for wall-mounting do not conceal electrical
wiring or plumbing. Using the supplied wall bracket, mark the location of the pilot
holes and pre-drill each hole for the mounting screws (not included) using the correct
mounting hardware for the specic wall material.
Once the wall mount bracket is attached to the wall, set the SUB+ feet onto the bracket’s
rubber connectors, then push down to secure.
CHOOSE PLACEMENT