Installation Guide
bluestarcooking.com 11
Installaon Instrucons
• Roll the appliance(s) into posion near the kitchen
enclosure, allowing enough space to work behind the
appliance(s) for connecng the ulies and in the case
of mulple appliances, the joining kit.
Step 3 — Hook Up Electrical and Water
• Unwind the power cord and connect it directly to the
wall socket.
• Make sure the appliance is in the stand-by condion
and that all lights are o; if necessary, press the Power
buon to switch it o.
• For Freezer Models: Connect the household water line
to the 1/4” quick connector elbow adapter supplied
with the product.
• Thread the elbow adapter onto the water valve on the
back of the appliance. Firmly ghten with ngers. A
tool should not be needed to make a proper seal. Turn
on the water and ensure all connecons are not leaking
prior to pushing the appliance into the enclosure.
Step 4 — Level the Appliance
• Adjust the height of the rear wheels by turning the
front adjusng bolts (1) clockwise (raise) or counter-
clockwise as required.
Important: Take care if using a power driver for the rear
leveling wheels. Reduce the torque seng to prevent
damage to the leveling mechanism.
Important: Do not make large adjustments to just one foot
or wheel by itself as the appliance will become unstable.
Make small adjustments to each foot and wheel locaon as
you go.
Step 5 — Aach Plasc Connecng Brackets
• Using the screws already installed in the sides of the
appliance, aach the plasc connecng brackets (A) to
the sides of the appliance.
1
1