Installation Instructions
CHECK THE INSTALLATION LOCATION
• If your installation has been roughed-in (including duct work and wiring), be certain there is nothing in the way
of the mounting, pipes, other wiring etc.
• If the installation has not been roughed-in, check what is needed to create the framing and mounting hardware
(allthreads, nuts, etc.). Be sure the location will not interfere with wiring, other utilities, or structural
considerations.
CHOOSE THE INSTALLATION METHOD
• There are several different methods available to mount the hood: the Unistrut, Angle Iron, Frame In, Wall
Mounts, Island Mount and Rough-in Plate Mount, which can be used for both indoor and outdoor. Please check
the model options for the suggested methods of your installation. Each hood type and site requirements are
presented as follows.
• Please read the instructions in their entirety prior to installing the hood.
CONNECTING DUCT WORK
• Ducting should be as short and straight as possible for best fan performance.
• Seal all joints with duct tape.
CHIMNEY HOOD INSTALLATION
27