Use and Care Guide
30 
CARE AND CLEANING 
    Make sure the cooktop surface and range are cool before cleaning.   
PART/ 
MATERIAL 
CLEANING 
FREQUENCY 
ATTENTION 
Backguard 
Clean with stainless steel cleaner. Follow 
cleaner manufacturer’s instructions. 
As needed 
Do NOT use steel wool, metal 
pads or abrasive cleaners. 
Discoloration may occur with 
heavy use. 
Burner Top 
Grates / Cast 
Iron / Burner 
Caps 
Wash grates in hot, soapy water. Rinse well 
and dry thoroughly. 
For heavy soiling, use a commercially 
available oven cleaner. Follow the cleaner 
manufacturer’s instructions.  
With each use 
Do not submerge in water for 
extended periods as this may 
cause rusting. 
Do NOT allow commercial oven 
cleaner to touch painted or 
stainless steel surfaces. 
Burner Ring 
Grate/Cast Iron 
Wash grates in hot, soapy water. Rinse well 
and dry thoroughly. 
For heavy soiling, use a commercially 
available oven cleaner. Follow the cleaner 
manufacturer’s instructions.  
With each use 
Do not submerge in water for 
extended periods as this may 
cause rusting. 
Do NOT allow commercial oven 
cleaner to touch painted or 
stainless steel surfaces. 
Burner Ports / 
Cast Iron 
Use a push pin or safety pin to clear clogged 
burner ports. 
As needed 
Do not use a wooden or plastic 
toothpick, or any other 
material that can break. 
Charbroiler 
Grates / 
Porcelain coated 
Wash in hot soapy water using a non-metallic 
grill brush. Rinse well and dry thoroughly.  
After every use 
Clean the Charbroiler grease 
Drip Pan after every use. 
Convection Fan 
Guard / 
Porcelain 
Enamel 
Remove obstructions like aluminum foil or 
other particles. 
Apply commercial oven cleaner to a cloth and 
wipe the guard. Follow manufacturer’s 
instructions. 
Once a month; 
more often 
with frequent 
use. 
Turn on ventilation fan and 
make sure room is well vented. 
Do NOT use steel wool, metal 
pads or abrasive cleaners. They 
may scratch and damage the 
coating. 
Grease Pan 
Remove from range. Discard grease and wash 
in hot soapy water. Apply stainless steel 
cleaner as needed with a rag, following 
cleaner manufacturer’s instructions. 
As needed 
depending on 
use. 
Do NOT use abrasive sponges 
or steel wool. 
 WARNING 










