Instructions / Assembly

/
/
Unit Operation
Unit Operation
Unit Operation
Unit Operation
System Settings
With power off, press SET button to actuate system setting .
The Memory Group icon flashes.
1. select memory Group
Wile in the System Setting mode you may accumulate test
rescuts into 2 diffterent groups. This allows multiple users to
save individual test results ( up to 60 memories per group).
Press M button to choose a group setting. The test
results will automatically store in each selected group.
3. Time Format Settung.
Press SETbutton again to set the time format mode.
Set the time format by adjusting the M button .
EU means European Time US means U.S Time.
11
13 14
12
15
4. Save Settings
While in any setting mode, press " START/STOP " button to
turn the unit off. All information will be saved.
1
-2cm ''(0.
4-0.8 )
S
E
T
M
SYS
PUL
/
min
DIA
mmHg
mmHg
S
T
O
P
S
TA
R
T
Applying The Wrist Monitor
Do not apply over clothing. If wearing a long sleeved shirt,
be sure to roll sleeve back to forearm.
Apply monitor to wrist as illustrated. Tighten cuff firmly as
not to wiggle.
Note: Unit will automatically save all information and shut off
if left idle for 3 minutes.
Unit Operation
16
2. Time/Date setting
Press SET button again to set the Time/Date mode. Set the
year first by adjusting the M button. Press SET button
again to confiom curret month. Continue setting the day, hour
and minute in the same way. Every time the SETbutton is
pressed, it will lock in your seletion and continue in
succession ( month,day,hour minute)
/
Quick Start
4. Sit in a comfortable position and place wrist level with heart.
(See Figure D)
5. Press button to start testing. (See Figure E) " START/STOP "
Figure E
Figure D
S
E
T
M
SY
S
P
U
L
/
m
i
n
D
I
A
m
m
Hg
m
m
Hg
S
T
O
P
S
T
A
R
T
Battery Installation
Slide battery cover off as indicated by arrow.
Install 2 new AAA alkaline batteries according to polarity.
Close battery cover.
Note:
1) " "
2) Batteries should be removed from device when not in
operation for an extended period of time.
Replace batteries when Low Battery Indicator
appears on screen.