Instructions / Assembly

ManualsBrandsBluestone ManualsBlood Pressure MonitorsDigital Blood Pressure Upper Arm Cuff

Unit Operation

Testing

1. Power On

" START/STOP " The LCD screen will appear

for one second as unit performs a quick diagnosis. A long tone indicates device is ready

for testing.

Press and hold button until a beep sounds.

Note: Unit will not function if residual air from previous testing is present in cuff.

The LCD will flash " " until pressure is stabilized.

AVG

mmHg

kPa

(

( )

)

Unit Operation

3. Time Format setting

Press “ SET ”button again to set the time fornat setting mode.Set the time format

by adjusting the“M” button. EU means European Time US means U.S Time.

4. Saved Settings

While in any setting mode, press " START/STOP " button to turn the unit off. All

information will be saved.

Note: If unit is left on and not in use for 3 minutes, it will automatically save all information

and shut off.

/ /

Unit Operation

Applying the Arm Cuff

1. Firmly insert air plug into opening located on left side of monitor unit.

2. With sticky nylon section facing outward, insert end of cuff underneath metal ring

of cuff

3. Fasten cuff about above the elbow joint. For best results apply cuff to

bare arm and keep level with heart while testing

1-2cm (0.4-0.8'')

Note: Do not insert air plug into opening located in the front of monitor unit.

This opening is designed for an optional power supply only.

1-2

cm ''(0

8 )

mHg

Unit Operation

System Settings

1. Select Memory Group

While in the System Setting mode, you may accumulate test results into 2 different

groups. This allows multiple users to save individual test results (up to 60 memories

per group.) Press " M " button to choose a group setting. Test results will

automatically store in each selected group.

With power off, press "SET" button to activate System Settings. The Memory Group icon

flashes.

2. Time/Date setting

Press“SET” button again to set the Time/Date mode. Set the year first by adjusting

the “M” button.

Press“SET” button again to confirm current month. Continue setting the date, hour

and minute in the same way. Every time the “SET” button is pressed, it will lock

in your selection and continue in succession ( month,date,hour, minute)