Instructions / Assembly

ManualsBrandsBluestone ManualsBlood Pressure MonitorsDigital Blood Pressure Upper Arm Cuff

Unit Operation

Irregular Heartbeat Indicator

If the monitor detects an irregular heart rhythm two or more times during the measuring

process, the Irregular Heartbeat Symbol " "appears on screen along with

measurement results. Irregular heartbeat rhythm is defined as rhythm that is either 25%

slower or faster than the average rhythm detected while measuring systolic blood pressure

and diastolic blood pressure. Consult your physician if the Irregular Heartbeat Symbol

" " frequently appears with your test results.

5. Deleting/Storing Test Results

User may delete their current test result due to unfavorable testing conditions or for any

other reason. To delete the last test result, press the "SET" button after result is displayed.

If result is not deleted, it will automatically store by date within the previously configured

Memory Group.

Note: Be sure the appropriate Memory Group selection is made prior to testing.

If the number of tests surpasses the allotted 60 memories per group, the most recent tests

will appear first, thus eliminating the oldest readings.

Power Off

turn off the power itself about 3 minutes no operation in any mode.

The " START/STOP " button can be pressed to turn off the unit in any mode. The unit can

Safety Precaution: If pressure in arm cuff becomes too extreme while testing,

press the " START/STOP " button to turn power off. The cuff pressure will rapidly

dissipate once the unit is off.

3. Testing

After cuff inflation, air will slowly subside as indicated by the corresponding cuff pressure

value. A flashing " " will appear simultaneously on screen signaling heart beat

detection.

Note: Keep relaxed during testing. Avoid speaking or moving body parts.

Unit Operation

4. Result Display

Three short beeps sound when testing is complete. The screen will display

measurements for systolic and diastolic blood pressure. An indicator representing

the current measurement will appear next to the corresponding WHO Classification.

Indicator

Note: Refer to Page 23~24 for detail WHO Blood Pressure Classification Information.

mmHg

Unit Operation

Last 3 Tests Average

With power off，press the "M" button to activate screen display. After the unit performs

a self-diagnosis ,the screen will display the average test results from the last 3 readings

of the last group used. The "AVG" symbol will appear along with the corresponding

WHO Blood Pressure Indicator. The Memory Check mode can be accessed by

pressing "M" button. To check the average results from other groups, select the

desired group first prior to activating "SET" button in the off position.(See "Select

Memory Group" on Page 10)

mmHg

AVG

Unit Operation

2. Pressurization

Initial pressure is first pumped to 190mmHg. If the current user's systolic blood pressure

is over 190mmHg, the unit will automatically re-inflate to the proper shelf.

Note: Pressurization will gradually subside and ultimately stop when cuff is not

properly applied to the arm. If this occurs, press“ START/STOP ”button

to turn the unit off.

mmHg