User Manual

BLUETAKE BT007Si / BT009Si Bluetooth USB Adapter – User Manual
- Bluetooth Passkey
. Set Default Passkey
Use this setting to create a default passkey for all connections. This saves
you the effort of manually creating a passkey whenever one is required.
- Data Encryption
. Enable Data Encryption
If checked, the data transmitted will be encrypted.
A-1.3.3 Managing Device Pairings
To access the device security configuration screen, click My Bluetooth | Security
and click on the Devices tab.
Paired Devices
This screen lists devices which have already paired with the local device.
Remove Pairing
Click to remove the pairing relationship between the selected device and the local
device.
Authorization
Click to select the local Bluetooth services that you wish to allow the selected
paired device to use. A list of local services will appear. Select the services you wish
to allow on the remote device, then click OK.
Note: The screen will only list the local services that require authentication. The
local services that do not require authentication can be accessed freely.
The Authorization button is enabled only when the Security Level is set to
Medium.
A-1.3.4 Local Services Security
To access the local services security configuration screen, click My Bluetooth |
Security and click on the Services tab. You can only configure security for local
services when the Security Level is set to Medium. (Set the Security Level in the
60