User's Manual

BLUETOOTH STEREO HEADPHONE KIT – USER MANUAL

Using with the Bluetooth-enabled Mobile Phone

Besides the wireless stereo application, the i-PHONO mini

headphone can be used for mobile hands-free communication

with mobile phones which support either the Headset or

Hands-free profile of Bluetooth wireless technology.

You can answer or make a phone call via the i-PHONO mini

headphone with the Bluetooth-enabled mobile phone while you

are listening to music. Once you end the call, the stereo

streaming will come back automatically to the headphone.

Step-1: Follow “Pairing” procedure to make the i-PHONO mini

headphone enter to the pairing mode. If the headphone is

already on, please disconnect all Bluetooth services between

the headphone and other devices in advance.

Step-2: Follow the operating instruction for your Bluetooth

mobile phone to start the pairing process. Typically, this is done

by going to a ”Connect” or “Setup” menu and then selecting the

options to search the headphone that is still in the pairing mode.

Step-3: The mobile phone’s display should indicate to you that it

found the headphone named “iPHONO mini” and ask if you

want to pair it. Please press the corresponding button such as

“Ok”, “Yes” or “Accept” to confirm this.

Step-4: The mobile phone’s display should then prompt you for

a passkey or PIN. Enter 0000 (a sequence of four zeros) and the

display should prompt the pairing result. If the pairing is

unsuccessful, please power off the headphone, re-launch it,

return to Step-1, and try again.