Operation Manual

14
Using the Self-timer and Burst snapshot
Use the self-timer to set a delay from the time the shutter button is pressed
to the time the image is shot. Use the burst snapshot to take pictures
continuously.
1: Turn the power on and set the video camera to the Capture mode.
2: Press the RIGHT button to change the self-timer mode: each time the
RIGHT button is pressed, the icon on the up left corner is changed.
2 seconds: The shutter release will delay for 2 seconds.
10 Seconds: The shutter release will delay for 10 seconds.
Note:After the shutter release button has been pressed down, the self-timer
LED on the front starts to blink and takes a single shot after 2 or 10
seconds depending on the setting.
Burst snapshot: Hold the SHUTTER button to take pictures
continuously. It will automatically take pictures in the interval of 1